IN-LINE AIR & GAS FILTERS

IN-LINE AIR & GAS FILTERS

Download Product Sheet (PDF)

Filters InlineAirGas
Filters InlineAirGas above
Filters InlineAirGas2

Series E20 - Enameled Steel w/Bolted Closure
Series E22 - 304 Stainless Steel w/Bolted Closure

Rugged Enameled Steel Construction Series

E20 & E22 air/gas filters utilize a single self sealing cylindrical filter element to provide the ultimate in protection for compressors, blowers, turbines, engines, and other pipeline equipment. Fabricated from heavy gauge enameled or 304stainless steel, they utilize a bolt seal closure with neoprene or teflon gasketing for service to 5 psid*. Any model can be modified to more exactly suit your needs.

  • Air/Gas Flows to 20,000 SCFM
  • Low ΔP / High Flow Design
  • 304SS Throat Safety Cages Std.
  • Connection Sizes to 24"
  • Bolt Seal Closure to 5 psid
  • Options: ΔP Taps, Angle legs, ΔP gauge

Connections to 24"

Male NPT (MT) or flat face flanges (FF) are std. Flanges match diameter & drilling for 150# ANSI standard. Specify optional female NPT (FT), bevel (BE) or plain cut (PE) stub necks where you wish to weld in place. Increased or decreased connections are also available on any model.

Choice of Filter Elements

Series E22 In-Line Air & Gas Filters are similar to enameled steel series E20 but are constructed instead from 304 stainless steel. Filter elements w/304 SS media support screen &/or center cores are also available. (Replace the “K” in the filter element part number with an “N” for 304SS core and 304SS media support screen, or a “Q” for 304SS core with epoxy coated aluminum media support screen). These textile media elements are superior for low ΔP, high dirt holding capacity and exceptional efficiency. They stop pipe scale and other contaminates before they can travel downstream. Select from 10µ, 4µ High Efficiency, or 0.3µ coalescing filter elements as your needs dictate to remove 98% of all dust, dirt, and if coalescing, fine mists. Addt'l. media and element styles are available for services at elevated temperatures or specific chemistries.

Contact Us

Shawndra Products™, Inc.
Rush Certified and A&E Testing

1514 Rochester Street
P.O. Box 488
Lima, NY 14485
Phone: 585-624-4500
Fax: 585-624-5300
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.