|
Series B10 - Enameled Carbon Steel w/Weather Hoods
Series B12 - 304 Stainless Steel w/Weather Hoods
Series B10 & B12 air intake filters provide superior protection for compressors, blowers, turbines, engines, and other air handling equipment. They are fabricated from heavy gauge enameled steel. Series B12 corrosion resistant weather hoods reject rain and snow in coastal environments. They are also well suited for service in food processing installations serving pneumatic blowers. Any of the 20 standard models can be modified at your request to more exactly fit your needs.
Connection Sizes from 1/2" to 24"
Male NPT (MT) or flat face flanges (FF) are std. Flanges match diameter & drill ing for 150# ANSI standard. Specify optional right angle base (AF) for side mounts, female NPT (FT), bevel (BV) or plain cut (PE) stub necks where you wish to weld in place. Increased or decreased connections are also optionally available on any model.
Choice of Filter Elements
These textile filter elements are unsurpassed for low ΔP, high dirt holding capacity and exceptional efficiency. Unlike paper media they cannot rip or tear. These elements have no catastrophic mode of failure. They handle moisture, vibration, poor handling, and rugged service with ease. They stop airborne particulates and other contaminates before they can sneak into a compressor, blower, or turbine to do abrasion or varnish damage. The table below shows the favorite 10μ standard filter element. In addition, we offer a wide range of competetive filter elements that can serve your specific needs if a finer micron retention, or specific operating conditions exist.
Economy Air Intakes
Series B70 Air Intake Filters are similar to series B10, but use a lighter gauge hood assembly (caps are available on the B10 models) and do not include throat safety cages. This design more closely matches competitive OEM equipment at value oriented prices. However, these housings will accept the same premium quality textile filter elements as the B10, B50 and other housing series. Models (not listed) are also available to accept many competitive fi lter element sizes, please give us a call. |
|
Low Profile Designs with 304SS safety screen shown. Safety screen is std. on all B10 models. Filter element is not shown in this illustration.
|
|
Cap style cover std in OD of 20” and larger. Access handles are standard on models with OD of 12” and larger .
|
|
Rugged one piece 11 gauge enameled steel weather hoods, or cap assemblies on larger sizes resist damage from abuse common in industrial locations.
|
|
Alternate connection styles are readily available.
|
|
