Products - Process Filtration - Rush Series - Rush Econo

	Replacement Filter Elements

	Sheet Metal Housings

	Vacuum Filter Vessel (Non–Code)

	ASME Code Pressure Filter Vessels

	Desiccant Filters

	Featured Proprietary Products

Products | Process Filtration - Rush Series - Rush Econo

The Rush ECONO Series filter Provides exceptional value for Filtration of many liquids and Gases. The filter cartridge is an Engineered alternative to wound or Spun filter technology.

The filtration area of each Rush ECONO Series cartridge has been optimized to provide high dirt holding capacity, high flow rates and Low pressure drop.

All components are thermally bonded together to insure cartridge integrity. The colored polypropylene netting outer wrap helps protect the media and provides easy identification of the micron rating.

Rush ECONO Series cartridges are available in a wide range of Lengths, end fittings, "O" rings and Gaskets for easy installation intoExisting filter housings.

FEATURES:
	8-10 times the surface area of wound and spun filters
	100% polypropylene
	Multi-layer media construction
	Colored netting for ease of micron identification
	Available in wide range of end fittings
	FDA approved materials of construction

BENEFITS:
	Fewer change outs and lower differential pressure when compared to wound or spun filters
	Excellent compatibility
	Lower disposal cost
	No glue, resins or binders ?Direct competitive replacement
	High dirt holding capacity

APPLICATIONS:
	High pure water
	Mineral water
	Wine and beer
	Completion fluids
	Bulk chemicals
	Lube, oil
	Coatings
	Inks and pigments
	Gas feed stock

SPECIFICATIONS:
Micron ratings (nominal)‡:	0.5, 1 , 5, 10, 25
Media:	Polypropylene
Support structures:	Polypropylene
Gaskets & "O" Ring (Standard):	Polypropylene, Buna N
Dimensions (nominal):	2.5": O.D. x 1.06" I.D., 10", 20", 30", 40"lengths
Maximum temperature:	150°F
Maximum pressure:	75 psid @ 70° F, 40 psid @ 150°F
End Fittings:	DOE-Double open end, SOE-222 "O" Ring/Cap, SOE-222 "O" Ring/Fin
‡Micron efficiency was determined using multi-pass test procedure.